ASTRO WM-3209, Инструкция по эксплуатации, Страница: 20 / 254

8
*2: SDI IN A 1ch to SDI IN B 2ch (Number (2) and (4))
When Dual Link1 has been selected as the input channel, input the Link A signals to the SDI A1 connector and
the Link B signals to the SDI B1 connector.
For details on the dual link inputs, refer to “5.9 Concerning the Dual Link Input Settings.”
For details on selecting the input channel, refer to “3.4.2 INPUT CHANNEL.”
*3: REMOTE connector (Number (11))
Pin No. Description
1 GND
2 R1: User select
3 R2: User select
4 R3: User select
5 ENABLE_RMT
6 R4: User select
7 R5: User select
8 R6: User select
9 R7: User select
10 R8: User select
11 R9: User select
12 R10: User select
13 R11: User select
14 R12: User select
15 GND
This remote controller connector is used for external control (contact power supply system).
Pin 5, ENABLE_RMT, is used to determine whether external control (contact power supply system) is to be
executed.
If external control (contact power supply system) is being used, be sure to connect Pin 5, ENABLE_RMT, to
GND.
If Pin 5, ENABLE_RMT, is left open, settings made using external control (contact power supply system) will not
be executed.
For details, see “3.4.14 REMOTE ASSIGN”.
1
5
6
10
11
15