ASTRO WM-3209, Инструкция по эксплуатации, Страница: 221 / 254

Chapter 5 Specifications
209
(8) After all the digits in the new password have been input, keep selecting the rotary
encoder until the OK? box appears, and then press the encoder switch.
The input of the new password is now completed. When the new password is
changed, the "Password is Changed!" message appears at the OK? box.
Current ：１２３４
New
：２７５６
Password is Changed!
・・・
Flash Protect ON
Password Change
・・・
Flash Protect ON
Password Change
Contact Astrodesign's sales department if the dedicated password used to set
and release the Flash Protect function has been lost for some reason.
NOTE
The factory setting for the password used to set and release the Flash Protect
function is "0000."
NOTE
HARDWARE SETTING
Current
：１２３４
New ：２７５６
OK?
HARDWARE SETTING