ASTRO WM-3209, Инструкция по эксплуатации, Страница: 102 / 254

90
4.7 Audio Mode
Enter Audio Mode by setting the mode switch to AUDIO.
Displays the audio signal multiplexed in the SDI signal using level bars or vectors.
Use the F5 switch to toggle between level bar display and audio vector display.
The headphone output channel and volume can also be selected in this mode.
Use the Adjustment Dial to select.
Functions Assigned to Volume, Output L, Output R, MUTE, GAIN and Audio_Vector/Level_Meter
Setting Item Description Default
Volume/ MUTE (*1)
Volume: The audio output volume can be
adjusted from 0 to 255.
MUTE: The audio output is muted.
Volume
128
Output L Channel 1 through 16 can be selected as the
audio output from the earphone jack. 1CH
Output R Channel 1 through 16 can be selected as the
audio output from the earphone jack. 2CH
PK MEMORY (*2)
ON: The peak level of the level meter is held.
OFF: The peak level of the level meter is
updated at the specified interval.
OFF
GAIN (*3) ×1: Displays the audio vector display at
standard size.
×2: Displays at two times standard size.
×4: Displays at four times standard size.
×8: Displays at eight times standard size.
×16: Displays at sixteen times standard size.
×1
Level Meter/Audio Vector Level Meter: Performs audio level meter display
(*4)
Audio Vector: Performs audio vector display (*5)
Level_Meter
*1: The audio output volume is adjusted by turning the adjustment dial.
When the adjustment dial is pressed, the audio output volume is returned to its initial value.
The audio output volume can be adjusted even when MUTE has been selected.
*2: MUTE can be used only when Level_Meter is selected.
*3: GAIN can be used only when Audio_Vector is selected.
*4: Whether audio data is present or not is displayed in the cell at the very bottom of the lever bar.
For details, refer to “5.7.3 Various Settings of the Audio Level Meter.”
*5: A vector display is used when Channel 2 has been selected under Output_L or Output_R.