Associated Research HYAMP II 5030DT, Руководство по эксплуатации и обслуживанию

Страница: 15 / 53

SPECIFICATIONS
11
9. Low Limit Trip Range.
This capability makes it possible to ensure that a test item was properly connected
since the HYAMP II can be set to monitor minimum and maximum levels of resistance
during a ground bond test.
10. Front panel LCD displays test parameters and results.
A front panel LCD allows the operator to monitor the test. The display holds the
results after a test item failure so that the operator can easily review the test results.
Indications of low fail & high fail are clearly displayed.
11. PLC remote inputs and outputs.
The standard 9 pin interfaces provide outputs for Pass, Fail, and Test in Process.
Inputs include Test, Reset and Program Select. This gives the user all the basic
remotes required to configure the HYAMP II through simple PLC relay control.
12. Flashing Test indicator.
A flashing LED located directly over the high current terminal clearly indicates when
high current is active to provide maximum operator safety.
13. Withstand processing indicator.
A front panel LED indicates when the high voltage from the HypotPLUS II is being
applied to the item under test for greater operator safety.
14. Easily configurable into an automated test system.
HYAMP II comes standard with rear output connectors and rack mount handles to
make it simple to build into an automated system.
15. Software calibration control.
HYAMP II is calibrated through the front panel keypad. All calibration information
is stored in non-volatile memory. This allows HYAMP II to be completely calibrated
without removing any covers and exposing the technician to hazardous voltages.