Associated Research HYAMP II 5030DT, Руководство по эксплуатации и обслуживанию

Страница: 34 / 53

OPERATION
30
6. If a password for Lock Function is required, please use the numerical keys to enter a
four digit “Numerical Code” and press the “Enter” key. The program will go to the
Memory Lock Function. Once the password is set, the password has to be entered to
activate or deactivate the “Lock” function.
7. After setting the password, press the “Exit” key, the display will show:
M R - L o c k = ON
or
M R - L o c k = OFF
Press the “Enter” key to select Memory Lock “ON” or “OFF”.
If the MR-Lock is in the “ON” position, all the memory programs will be locked along
with keyboard functions. The operator will be locked out of recalling memory programs
while in the lock mode.
If the MR-Lock is in the “OFF” position, the instrument will not lock the memory
programs even if the keyboard is locked. The memory programs may be recalled while in
the lock mode but the test parameters within each setup cannot be changed.
( B.) Turning the LOCK function ON or OFF with no password activated:
Press the “Lock” key, the display will show:
L o c k = ON
or
L o c k = OFF
Press the “Enter” key to select the “Lock (ON)” or “Unlock (OFF)”mode, then press the
“Exit” key to exit and return to the test mode.If the “Lock” mode is selected, the “Lock”
indicator on the front panel will light and the keyboard will be locked. If the “Lock”
indicator is not lit, the keyboard will be operational.
(C). Turning the LOCK function “ON” or “OFF” with a “Password”:
Press the “Lock” key, the display will show:
P . W . # = __