Associated Research HYAMP II 5030DT, Руководство по эксплуатации и обслуживанию

Страница: 20 / 53

CONTROLS
16
17. LOCK KEY: Used to enter the security Lock Menu. This menu may or may not ask
for a password depending on how the Lock function was configured in the calibration
mode.
18. UP ARROW
Ï
: (FUNCTION KEY) Use this key to advance backwards through
the setup menus, remote, volume, and contrast. Also may be used to increase output
current during a test in 10 mA increments.
19. PASS LED INDICATOR: This green indicator lights at the end of a ground bond
test if no failure has occurred during the test.
20. FAIL LED INDICATOR: When a failure occurs (Hi or Low) during a ground
bond test this red indicator will light.
21. POWER SWITCH: Rocker-style switch with international ON (
|
) and OFF (0)
markings.
22. DATA ENTRY NUMERIC KEYPAD: For numeric entry or change of testing
parameters during the Setup mode. Keypad entry is unavailable if the “Lock”
indicator on the front panel is on. Press and hold one of these keys (until the second
tone is heard) to store parameters in memory. Also used to recall test parameters
stored in memory.
23. TEST LED INDICATOR: This green LED flashes to indicate to the operator that
voltage is present at the output terminal, and a test is in process.
24. RETURN OUTPUT JACK: For the connection of the detachable 5 foot (1.52 m)
black kelvin return test lead. This lead is always used when performing a test.
FRONT PANEL CONTROLS