Associated Research HYAMP II 5030DT, Руководство по эксплуатации и обслуживанию

Страница: 43 / 53

OPERATION
39
B. Simultaneous Testing
HYAMP II SIGNAL INPUT \ HypotPLUS II SIGNAL OUTPUT CONNECTION
HYAMP II SIGNAL OUTPUT \ HypotPLUS II SIGNAL INPUT CONNECTION
RETURN CABLE CONNECTION
For the return cable connection, it is suggested that two insulated banana plugs be used
with 18AWG stranded wire. For proper connection, one end of the return cable should be
connected the RETURN jack on the rear panel of the HypotPLUS II and the other end
connected to the INTERCONNECT jack on the rear panel of the HYAMP II. The
suggested E.F. Johnson part number for the banana plug is as follows:
108-0303-001
Banana Plug Insulated(2)
2. INTERCONNECTING WITH THE HAA-01 ACCESSORY CABLE KIT.
Accessory kit HAA-01 includes the rear interface cables needed for interfacing the
HYAMP II with the HypotPLUS II . The following table lists the kits contents in detail.
HYAMP II HypotPLUS II
1
• •
1
2
• •
2
3
• •
3
4
• •
4
5
• •
5
6
• •
6
7
• •
7
8
• •
8
9
• •
9
Female Plug Male Plug
HYAMP II HypotPLUS II
1
• •
1
2
• •
2
3
• •
3
4
• •
4
5
• •
5
6
• •
6
7
• •
7
8
• •
8
9
• •
9
Male Plug Female Plug