Wireless keypad PU-R
68
Global partitions are necessary for arming partitions of remote wireless
expanders.
Note: PU-R enables performance of those control operations that are ac-
companied by entering a user’s code only for global partitions.
Comment – allocating text descriptors to local partitions of an expander.
Descriptors are indicated by PU-R in the event protocol, status window
and etc.
The following partition descriptors are defined by default:
Entrance hall
Back entrance
Cellar
Bathroom
Bedroom
Playroom
Lavatory
Corridor
Dining-room
Stair
Back door
Emergency exit
Entrance door
Garage
Garage door
Reception room
Hall
Kitchen
Building extension
Living room
Workroom
Balcony
Study room
Mansard
Closet
Land territory
Partition
A descriptor varied from the others can also be allocated to a partition.
For that, use means of the software “Strelec” while synchronizing from a
PC.
Fire attention – an option, at which activation, a fire alarm in this parti-
tion will be generated only when at least two fire detectors have been
triggered. If only one fire detector has been triggered, an alarm signal
“Fire attention” will be generated. The option is not referred to triggering
of manual fire detectors.
Delay of arming/disarming – activation of delays for partitions arming
and disarming, extending from 32 sec. to 3.5 min..
"Rearming" – automatic arming of a partition in the period from 4 sec. to
15 min. after its tampering.
►Relay (R1, R2, R3, outputs LMP and SND)
Events
– a filter of events, which trigger a relay. The events are the fol-
lowing:
alarm (together with enforcement and tampers)
fire
fault
