Wireless Keypad PU-R
5 Configuration of Strelec
36
Make necessary changes in the window
of the wireless expander’s features. See
description
of
properties
in
the
After properties of a device are changed,
press repeatedly the button
‹
OK
›
until
the request "Apply settings?" is occurred.
Press the screen button
‹ Yes
›
.
While changing properties of a remote
expander, the window, requesting "Pro-
gram remotely?", will occur (if PU-R is
connected to WEx 0). Make sure that the
wireless expander is turned on and press
the screen button
‹ Yes
›
.
The process of programming is accompanied by blinking and the message
“Programming is completed” will occur at the end of the process.
If the wireless expander is required to be reprogrammed again, select it in
the network topology tree, press the screen button
‹ Action
›
and choose
the option "Program".
Changing features of slave devices
Switch into the menu
Menu
Configuring
System
Common properties
Partitions
Relay
Exit
Select
?
Apply
settings
No
Yes
?
Program
remotely
No
Yes
Programming
Cancel
!
Programming
is completed
OK
