Wireless Keypad PU-R
5 Configuration of Strelec
31
Pay attention that those slave devices,
that are just added and therefore, not
programmed yet, will be marked by "?"
in the topology tree.
In the way similar to the described above, add sequentially to the wireless
expander all its slave devices.
7.
If necessary, add slave devices to the wireless expander 0.
Menu
Configuring
System
WEx 0
‹ Action
›
1
Add device
WEx (fire-alarm)
After that, in the similar way add slave devices to all the wireless expanders
that were previously added.
Answer “No” to the request "Apply the settings?"
3.
Configuration of devices options
Options of devices can be altered in order to program Strelec operation algo-
rithm. The configuration of the options can be performed at the current stage or
later, after initial programming of all the devices (see the paragraph 5.4).
When adding to Strelec topology, options of the devices have their values by
default. If necessary, values of the options can be altered.
Properties of Strelec devices, available for altering by using the keypad
2
, are
described in the paragraph 8 (page 66). The options required to be configured
when a device is added, are marked
in bold
in the properties of devices in the
paragraph 8 .
After the options have been changed, answer the request "Apply settings?" by
"No".
1
If the right screen button has labeled <Show> instead of <Action>, press it in order to reveal the tree of devices,
after which press the screen button <Action> appeared on the screen.
2
The options, unavailable for programming by the keypad, can be programmed by a PC and the software Strelec
with their following copying to the keypad.
– Devices
? 0.1 Aurora-R
Properties
Action
Sign of the devices that
is not programmed
