Wireless Keypad PU-R
5 Configuration of Strelec
33
Activate the wireless transmission (according to the usual procedure in the
wireless system Strelec, turn the switch "Prog." into the position reverse to the
position "ON").
Make sure that the LED indicator has been
blinking green,
and the window
reporting
that
programming has
completed
suc-
cessfully is oc-
curred
at
the
keypad.
5.
Configuration of the keypad’s options
When the configuration of Strelec is completed, configure the keypad’s op-
tions.
1.
Change the engineer’s code of the keypad (on default is "1111")
Menu
Settings
Users
Engineer
Code
‹ Change
›
2.
Set the current time
Menu
Settings
Clock
‹Change
›
!
Programming
is completed
OK
ATTENTION!
If there are several keypads PU-R located in Strelec or while
using the software Strelec, read the configuration of the system
by other keypads or the utility file "WirelEx" just after one
keypad has been programmed.
Успех программирования +
вход в рабочий режим
Автонастройка