Wireless keypad PU-R
7 strelec’s control
62
‹
›
NN CCCC
where:
NN – user’s number, from 00 to 30. A user with the number 00 is an engineer.
CCCC – user’s code, from 0000 to 9999;
If resetting has been completed successfully, a
window reporting about resetting of faults and
fire alarms will occur at the screen.
If after resetting, the pictographs
or
will
show up again at the top part of the screen, it is necessary to define a reason for a
fire alarm or fault, following the procedure described in the paragraphs 7.2 – 7.4.
Fire alarms and faults can be reset separately in any local partition of a wireless
expander on entering an engineer or user’s code in the menu “Status” (see the par-
agraph 7.3).
7.8
Forced disarming
Forced disarming is performed in the circumstances when a criminal forces a user
to disarm a facility, while the user wishes to secretly report about it to the Monitor-
ing Station.
When a forced disarming is performed, global partitions are disarmed in the usual
way and an indication occurred corresponds to the indication accompanied a regu-
lar disarming. However, a message about forced disarming is generated in the
event protocol and transmitted to the Monitoring station by means of message
transmission devices (for example, Auto dialer UOO-AV version 1, the wireless
transmitter "Argon", etc.). Besides, if the event "Forced disarming" is occurred,
programmed relay outputs of the wireless expander
WEx
will be activated.
To
disarm
under enforcement
the list of global partitions, perform a disarming
using an user’s code, which last number is different by one from the current user’s
code.
For example:
User’s number – 01,
User’s code – 1234;
Pressing the buttons:
or
!
Resetting
State
Menu
‹
›
01
123
5
‹
›
01
123
3
