Wireless Keypad PU-R
5 Configuration of Strelec
32
4.
Programming of devices
Connect the keypad to the wireless expander, functioning as a network coordi-
nator.
In the window of devices topology, select the wireless expander WEx 0 (or
WEx 0 for wireless expanders
WExF
and
WExF240
) and select the action
"Program".
Reset the wireless expander, if a window re-
porting that it belongs to another system, is
occurred.
Menu
Configuring
System
WEx 0
‹ Action
›
1
Clear WEx
When resetting is completed, program the wireless expander.
Wait until a message about successful
completion of programming is occurred
and proceed with the following step.
Program in turns all the slave devices of the wireless expander. Select a slave
device in the menu in order to program it:
Menu
Configuring
System
WEx 0
‹ Show
›
1
Devices
‹ Show
›
and select the option "Program".
When the window requesting to "Connect-
ing" is occurred, add a slave device into the
programming mode (according to the usual
procedure, insert a battery into the device,
with its switch “Prog.” being on - see the
user manual for the wireless intelligent
fire&security system Strelec, or “Quick Start”).
!
WEx belongs to
another syst. 76**
OK
!
Programming
is completed
OK
Connecting
Cancel
