Wireless keypad PU-R
7 strelec’s control
54
7.3
Control of Strelec’s status
To review Strelec’s state, switch into the menu
Menu
System state
or
In the list of
wireless expanders
, no sym-
bols against an expander, being in operating
mode, should be displayed.
The symbol
in the columns means:
Column
Expander fault
Fault correction
Brk
Break
Close the cover and check that the event
protocol does not have the message “Sub-
stitution attempt"
AC
Fault of primary battery Check if the expander has the battery 12V
DC
Fault of secondary bat-
tery
Check if the secondary battery is in the
working order
Link
1
No wireless communi-
cation with the expand-
er
Make sure that the expander is turned on
and check that there is no message “Exter-
nal interference” in the event protocol
Bypass
Detectors with forced
bypasses
Disarm partitions of the expander to halt
the bypass of the detectors
1
Can be active only for slave expanders 1-15
Main window of PU-R
screen button
‹ State
›
Brk AC DC Link Bypass
WEx0
WEx1
Back
Select
Occurrence
– faults, tampers
– forced bypasses
3. The following indicators mustn’t glowing
Occurrence in the parti-
tions
– fire alarms
– security alarms
If the indicators
are glowing
, check thoroughly their
status (the paragraph 7.3, page 54),
or see the event protocol (the paragraph 7.4, page 58)
