Chapter 4 Operations for Each Function
4-62
Table 4.5.5-2 Transfer, Load and Play Operations
Check box
Descriptions
Remarks
Transfer
Starts Transfer & Setting Wizard after
waveform conversion
Confirmation dialog after the
waveform generation will not appear.
Available when executing in
MG3700, MG3710 or MG3740
mode.
Load
Loads the waveform pattern, created
as the result of waveform generation
application, to the memory
Available when executing in
MG3710A/MG3710E/MG3740A.
Play
Selects after loading the waveform
pattern, created as the result of
waveform generation application, to
the memory
Available when executing in
MG3710A/MG3710E/ MG3740A.
4. Click the OK button to start conversion. After this, if a clipping
occurs during the conversion, the warning message “The waveform
pattern to be generated will be above 8191 and be clipped.” is
displayed. If the OK button on the warning message dialog box is
clicked at this time to continue the conversion as is, a waveform
pattern for which clipping has been processed is generated.
Figure 4.5.5-5 Convert Progress Screen
The Conversion executing screen is displayed from the start to the
end of conversion.
5. When conversion is completed, click the OK button to return to the
Convert screen.
Two files of a file with the extension “.wvi” and a file with the
extension “.wvd” are output and created in the file specified by the
Export Path box after conversion.
