4.5 File Conversion on Convert Screen
4-59
■
Setting Burst information
To set the Burst information, click the Burst Setting check box to leave a
checkmark ( ). Then the Frame Length and Gap Length boxes become
enabled. Click an input area and enter a numeric value to set Frame
Length and/or Gap Length. Refer to Section 5.4 “Generating Waveform
Pattern” for details.
Figure 4.5.4-16 Burst Setting Dialog Box
■
Configuring RF Gate settings (for digitized and ASCII file and file
conversion)
To configure the RF Gate settings, click the RF Gate check box to leave a
checkmark ( ). The RF On/Off Threshold and Minimum RF Gate Length
boxes will then become enabled. Click an input area and enter a numeric
value to set the RF On/Off threshold and minimum RF gate length.
Figure 4.5.4-17 RF Gate Dialog Box