Chapter 4 Operations for Each Function
4-118
(9) OK
Click this button to finish applying the settings. If the restrictions
described in (6) are not fulfilled, an error display appears and the
settings cannot be completed.
(10) Cancel
Click this button to cancel the settings and close the setting screen.
4.9.2 Setting method
Two setting methods are available: selecting the wvi file of the target
wave, or setting all parameters.
■
Selecting wvi file
<Procedure>
1. Click the
button to select the wvi file of the waveform
pattern that is to be used as the target waveform.
2. The Coupled Pattern File check box is checked, and the full path of
the selected wvi file is displayed in the Coupled Pattern File text box.
The bandwidth and sampling rate of the target wave to be used are
loaded into the Wanted Signal BW (A) and Sampling Rate text boxes.
In the Package text box, the package name, in which the waveform
pattern file of the target wave is stored, is loaded.
3. Set values in the AWGN BW (B) / Wanted Signal BW (A), Package
and Comment1 to Comment3 text boxes.
4. Click the OK button to finish applying the settings.
■
Setting all parameters
<Procedure>
1. Click the Coupled Pattern File check box to uncheck it.
2. Set each parameter.
3. Click the OK button to finish applying the settings.