Chapter 4 Operations for Each Function
4-82
In the SG-side file display area, selects a waveform
pattern or combination files loaded into the waveform
memory A or B as an output waveform pattern. A
combination file can only be selected in the Defined
mode.
The selected waveform pattern or combination file is
output from the MG3700A/MG3710A/MG3710E/
MG3740A when either of the following conditions is
met:
•
When IQ Source is Int and both RF Output and
MOD On/Off are On
→
The waveform pattern is output from the RF
output.
•
When IQ Source is Int and I/Q Output are On
→
The waveform pattern is output from the IQ
output.
<8>
Defrag
Executes defrag for the waveform memories A and B
of the selected MG3700A (re-allocation of files in each
memory). Note, however, that defrag is not operated
when there is no need to execute defrag or when
several MG3700A units are selected.
Note:
This function is available only when MG3700A is
connected.
<9>
Edit Mode/Defined Mode
Changes the waveform pattern output mode of the
selected SG. In the Defined Mode, one of the patterns
or combination files loaded in the waveform memory
A or B is selected as an output waveform pattern.
In the Edit Mode, one output waveform pattern is
selected from each waveform memory, and the
selected two output waveform patterns are added to
be output.
<10> Load Pattern Combination to Memory
Loads the waveform patterns selected in the
combination file that is selected in the SG-side file
display area to the waveform memory A or B of the
MG3700A/MG3710A/MG3710E/MG3740A.
<11> Remove Pattern Combination from Memory
Removes the waveform patterns selected in the
combination file that is selected in the SG-side file
display area from the waveform memory A or B of the
MG3700A/MG3710A/MG3710E/MG3740A.
