AMO Catalys OptiMedica, Руководство оператора

Страница: 289 / 314

Appendix B – Patient Chair Instructions
Part Number: 0160-6411, Rev A, 02/2019 Page 289 of 314
Software Release: cOS 5.00
Patient Chair with Headrest and Joystick
The patient chair can be adjusted and orientated in three axes (x, y, and z) by using a precision
movement joystick control. The patient chair incorporates a headrest and restraint system that
stabilizes the patient’s head for the duration of the treatment.
Figure B.2 Patient Chair in Reclined Position
The patient chair allows for tilt articulation of the patient’s legs, torso, and head using manual
adjustments. The chair accommodates three positions:
• Patient load position—chair rotated out from under system with patient chair back in
upright position and patient footrest in lowered position
• Suction ring capture position—chair rotated out from under system with patient chair
back in reclined position and patient footrest in raised position
• Patient treat position—chair rotated under system with patient chair back in reclined
position and patient footrest in raised position
NOTES
If the system becomes disabled for any reason during treatment, lower the patient’s head using
the headrest vertical adjustment knob. This enables removal of the
LIQUID OPTICS™ Interface
and allows the patient chair to be rotated out from under the system.
The patient chair manufactured before May 2013 emits an audible tone when it is unlocked to
allow motion.
CAUTION
Do not stand on the patient chair, patient chair footrest, or patient chair headrest. The patient
chair is designed to support seated and reclined patients only.
Joystick Control
The joystick is a proportional controller—moving the joystick a small amount causes the chair to
move slowly; moving the joystick a large amount causes the chair to move faster; holding the
Headrest Neck Support
Adjustment Knob
Joystick Control
Headrest Vertical
Adjustment Knob