Ametek Thermox WDG-1200 Insitu, Руководство пользователя

Страница: 87 / 100

Service and Parts
|
6-1
Service and PartS
The operations in this chapter should be performed only by quali-
fied service personnel with knowledge of electrical safety techniques.
There are no operator-serviceable components inside the system.
Never service the controller or Insitu probe unless power has been
removed from the controller and the probe has been allowed to cool
for one hour.
This chapter shows you how to replace sensor parts. This includes the following:
• Inner Probe Assembly removal
• Cell replacement
• Thermocouple replacement
• List of Replacement Parts
You can clean the outside of the sensor or controller using normal household or
commercial general purpose cleaners, cloths, or sponges. You can also use water.
Always turn off power before attempting to clean the enclosure.