Ametek Thermox CEM O2/TM, Руководство пользователя

Страница: 135 / 168

Service and Parts
|
7-1
SERVICE AND PARTS
The operations in this chapter should only be performed by qualified
service personnel with a knowledge of electrical safety techniques.
There are no operator serviceable components inside the CEMO2/TM
system, and an operator should never remove analyzer component
covers. Qualified service personnel should never attempt to service the
controller or sensor unless power has been removed from the control-
ler and sensor, and the sensor has been allowed to cool for at least one
hour.
This chapter shows you how to replace system parts, and is divided into
the following sections
•
Cell Replacement
•
Thermocouple Replacement
•
Furnace Replacement
•
Parts Replacement List
You can clean the outside of the sensor or controller (or Remote Calibra-
tion Unit) using normal household or commercial general purpose clean-
ers, cloths, or sponges. You can also use water. Always turn off power
before attempting to clean the enclosure.