Ametek EC1000S, Руководство пользователя

Страница: 211 / 291

User Manual EC1000S
California Instruments 207

[SOURce:]PHASe[:IMMediate]
This sets the phase at the start of output. The phase setting range is 0.0 to 359.9

. However,
when output is on, the phase setting cannot be changed. ([1,
“Invalid with output on”] error
occurs.)
When in AC-EXT or AC+DC-EXT mode, the output waveform setting cannot be set. ([3,
“Invalid
in this mode
”] error occurs.)
Syntax: [SOURce:]PHASe[:IMMediate] <NR2>
Parameters: 0.0 to 359.9
Command example: PHAS 90
Query example: PHAS?
Response format: <NR2>
Response example: 90.0

[SOURce:]SEQuence:CONDition?
This returns the sequence status. The response message is 0 (Idle mode), 1 (Run mode), or 2
(Hold mode).
Syntax: [SOURce:]SEQuence:CONDition?
Parameters: None
Query example: SEQ:COND?
Response format: <NR1>
Response example: 0

[SOURce:]SEQuence:CSTep?
This returns the step number being executed. The response ranges from

1 and 1 to 255.

1
is returned in the idle mode.
Syntax: [SOURce:]SEQuence:CSTep?
Parameters: None
Query example: SEQ:CST?
Response format: <NR1>
Response example: 2

[SOURce:]SEQuence:LEN?
This returns the maximum number of sequence steps. 255 is always returned.
Syntax: [SOURce:]SEQuence:LEN?