Ametek EC1000S, Руководство пользователя

Страница: 209 / 291

User Manual EC1000S
California Instruments 205

[SOURce:]FREQuency:LIMit:HIGH
This sets the upper limit of the frequency that can be set. However, a value that is at or below
the currently set frequency cannot be set. ([5,
“Out of Limiter”] error occurs.)
The limit value setting ranges from 1.0 to 550.0 Hz.
Syntax: [SOURce:]FREQuency:LIMit:HIGH <NR2>
Parameters: 1.0 to 550.0
Command example: FREQ:LIM:HIGH 550
Query example: FREQ:LIM:HIGH?
Response format: <NR2>
Response example: 550.0

[SOURce:]FREQuency:LIMit:LOW
This sets the lower limit of the frequency that can be set. However, a value that is at or above
the currently set frequency cannot be set. ([5,
“Out of Limiter”] error occurs.)
The limit value setting ranges from 1.0 to 550.0 Hz.
Syntax: [SOURce:]FREQuency:LIMit:LOW <NR2>
Parameters: 1.0 to 550.0
Command example: FREQ:LIM:LOW 50
Query example: FREQ:LIM:LOW?
Response format: <NR2>
Response example: 50.0

[SOURce:]FUNCtion[:SHAPe][:IMMediate]
This sets the output waveform. The output waveform setting is SIN/SQU/ARB1 to ARB16.
When in AC-EXT/AC+DC-EXT mode, the output waveform cannot be set. ([3,
“Invalid in this
mode
”] error occurs.)
Syntax: [SOURce:]FUNCtion[:SHAPe][:IMMediate] <CRD>
Parameters: SIN/SQU/ARB1 to ARB16
Command example: FUNC SIN
Query example: FUNC?
Response format: <CRD>
Response example: SIN