Ametek EC1000S, Руководство пользователя

Страница: 218 / 291

User Manual EC1000S
California Instruments 214

[SOURce:]VOLTage:LIMit:LOW
This sets the upper limit of the output voltage that can be set. However, a value that is at or
below the currently set cannot be specified. ([5,
“Out of Limiter”] error occurs.)
For the 100 V range, the limit value setting ranges from

200.0 to

5.0 V, and for the 200 V
range, it ranges from

400.0 to

10.0 V.
Syntax: [SOURce:]VOLTage:LIMit:LOW <NR2>
Parameters:

200.0 to

5.0 (

400.0 to

10.0)
Command example: VOLT:LIM:LOW

200
Query example: VOLT:LIM:LOW?
Response format: <NR2>
Response example:

200.0

[SOURce:]VOLTage:OFFSet[:IMMediate]
This sets the DC voltage when in AC+DC-INT, AC+DC-ADD, or AC+DC-SYNC mode. For the
100 V range, the DC output voltage setting ranges from

200.0 to 200.0 V, and for the 200 V
range, it range, from

400.0 to 400.0 V.
The DC output voltage cannot be set unless the mode is AC+DC-INT, AC+DC-ADD, or
AC+DC-SYNC mode. ([3,
“Invalid in this mode”] error occurs.)
Syntax: [SOURce:]VOLTage:OFFSet[:IMMediate] <NR2>
Parameters:

200.0 to 200.0 (

400.0 to 400.0)
Command example: VOLT:OFFS 10
Query example: VOLT:OFFS?
Response format: <NR2>
Response example: 10.0

[SOURce:]VOLTage:RANGe
This sets the output voltage range. The output voltage range setting is 100 V or 200 V.
However, when output is on, output voltage range cannot be changed. ([1,
“Invalid with output
on
”] error occurs.)
Syntax: [SOURce:]VOLTage:RANGe <NR1>
Parameters: 100/200
Command example: VOLT:RANG 100
Query example: VOLT:RANG?
Response format: <NR1>
Response example: 100