Ametek EC1000S, Руководство пользователя

Страница: 11 / 291

User Manual EC1000S
7

Safety Precautions

To ensure safe use, be sure to observe the following warnings and cautions.
California Instruments and NF Corporation shall not be held liable for damages that arise from a failure to
observe these warnings and cautions.
This product is a Class 1 product (with protective conductor terminal) that conforms to the JIS and IEC
insulation standards.

Be sure to observe the contents of this instruction manual.
This instruction manual contains information for the safe operation and use of this product.
Be sure to read this information first before using this product.
All the warnings in the instruction manual must be heeded to prevent hazards that may cause major
accidents.

Be sure to ground the product.
This product uses a line filter and must be grounded to avoid the risk of electric shock.
To prevent electric shock, be sure to safely implement grounding according to local electrical safety codes.
The EC1000S is automatically grounded when the 3-prong power plug is connected to a 3-prong power
outlet with a protective grounding contact.
This product does not come with a 3-prong to 2-prong conversion adapter. When using a separately sold
3-prong to 2-prong conversion adapter, be sure to connect the grounding wire of the adapter to the
grounding terminal next to the outlet.

Check the power supply voltage.
This product operates on the power supply voltage indicated in Grounding and Power Supply Connection in
this instruction manual.
Prior to connecting the power supply, check that the voltage of the power supply matches the rated power
supply of the product.

In case of suspected anomaly
If this product emits smoke, an abnormal smell, or abnormal noise, immediately power it off and stop using
it.
If such an anomaly occurs, do not use this product until it has been repaired, and immediately report the
problem to the location of purchase (either California Instruments or your distributor).

Do not use this product when gas is present.
An explosion or other such hazard may result.

Do not remove the cover.
This product contains high-voltage parts. Absolutely never remove its cover.
Even when the inside of this product needs to be inspected, do not touch the inside. All such inspections are
to be performed by service technicians designated by California Instruments.