Ametek EC1000S, Руководство пользователя

Страница: 197 / 291

User Manual EC1000S
California Instruments 193
6.2 Command List
The EC1000S command list is shown in Table 6-1 to Table 6-9 and IEEE488.2 (SCPI) common
commands supported by the EC1000S are listed in Table 6-10 .
The symbols used in Table 6-1 to Table 6-10 are explained below. The lowercase letters in each
keyword can be omitted.

Square brackets indicate keywords that can be omitted. (Implicit keywords)

A vertical bar ( | ) indicates that one of several keywords is selected.
Table 6-1. Command List (SOURce Subsystem)
Function Command
Output average current limiter [SOURce:]CURRent:LIMit:AVErage
Output peak current limiter (positive) [SOURce:]CURRent:LIMit:PEAK:HIGH
Output peak current limiter (negative) [SOURce:]CURRent:LIMit:PEAK:LOW
Output frequency [SOURce:]FREQuency[:IMMediate]
Frequency upper limit setting limit [SOURce:]FREQuency:LIMit:HIGH
Frequency lower limit setting limit [SOURce:]FREQuency:LIMit:LOW
Output waveform [SOURce:]FUNCtion[:SHAPe][:IMMediate]
Output mode [SOURce:]MODE
Sync signal source (external
synchronization mode)
[SOURce:]PHASe:CLOCk
Phase when output is started [SOURce:]PHASe[:IMMediate]
Sequence status [SOURce:]SEQuence:CONDition?
Step number during execution [SOURce:]SEQuence:CSTep?
Maximum number of steps in sequence [SOURce:]SEQuence:LEN?
SEQ: jump times in step specified by
STEP
[SOURce:]SEQuence:COUNt?
Clear sequence memory [SOURce:]SEQuence:DELete
Step execution parameter [SOURce:]SEQuence:EPARameter
Step transition parameter [SOURce:]SEQuence:TPARameter
Target step number for sequence
editing
[SOURce:]SEQuence:STEP
AC output voltage [SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
Output voltage upper limit setting limit [SOURce:]VOLTage:LIMit:HIGH
Output voltage lower limit setting limit [SOURce:]VOLTage:LIMit:LOW