Ametek EC1000S, Руководство пользователя

Страница: 201 / 291

User Manual EC1000S
California Instruments 197
Table 6-10. Common Command List (Common Commands and Queries)
Common
Commands and
Queries
Name Function
*CLS Clear command Clears standard event register, etc.
*ESE
Standard event enable
command
Sets standard event enable register.
*ESR? Standard event register query Queries standard event register.
*IDN? Identification query Queries device ID information.
*OPC Operation complete command
When device operation is completed, the
standard event register operation
complete message (OPC) is generated.
*RCL Recall command
Reads contents of specified setting
memory.
*RST Reset command
Executes device reset.
* In this device, the processing that is
performed is similar to initializing the
setting memory.
*SAV Store command
Saves contents of specified setting
memory.
*SRE
Service request enable
command
Queries settings in the service request
enable register.
*STB? Read status byte query
Queries status byte and master summary
status bit.
*TST? Self test query
Executes auto test of device and returns
the results.
*
For this device, “0” is always returned.
*WAI Wait to continue command
Sets device in wait mode until all
operations are completed.