AMAZONEN-Werke Amazone Centaya 3000 Super 1600, Руководство по эксплуатации

Страница: 175 / 222

Use of the implement
Centaya Super BAH0092-6 10.20
175
10.3 Coulter array lighting
The coulter array lighting (Fig. 222/1) is switched
on the

AmaDrill 2 terminal or

ISOBUS control terminal.
Fig. 223
10.4 Moving the implement from transport into working position
1. Move the road safety bar of the exact following harrow into parking position .............. Page 167
2. Move the exact following harrow into working position ................................................. Page 157
3. Move the tramline marker into working position ............................................................ Page 163
10.5 Work commencement
1. Put the implement into working position at
the beginning of the field.
2. Adjust the length of the top link (Fig. 224/1).
The setting lengths can be found in section
"Coupling - Pack top seed drill and soil
tillage implement", page 117.
3. Tighten the lock nut for the top link length
adjustment.
Fig. 224
The implement

with RoTeC-Pro Control coulters is aligned
straight when the top link length is properly
adjusted.

with TwinTeC double disc coulter is aligned
such that the parallel-guided coulters are
horizontal during operation when the top
link length is properly adjusted.
The top link (Fig. 225/1) and lower link (Fig.
225/2) run parallel to the ground. This
ensures that the coulters have enough
clearance at the top and bottom during
operation, with equal coulter pressure on
the short and the long coulter.
Fig. 225
4. Check all of the implement settings, see section "Settings", see page 128.