AMAZONEN-Werke Amazone Centaya 3000 Super 1600, Руководство по эксплуатации

Страница: 31 / 222

General Safety Information
Centaya Super BAH0092-6 10.20
31
2.16.4 Mounted implements

When mounting, the mounting categories on tractor and implement must be compatible or an
adapter must be used.

Observe the manufacturer's instructions.

Before mounting or dismounting implements on the three-point hitch, put the operating equipment
to a position in which accidental raising or lowering is impossible.

There is a danger of crushing or shearing injury in the area of the three-point linkage.

The implement may be transported and towed only by the tractors intended for this purpose.

There is a risk of injury when implements are coupled to and uncoupled from the tractor.

Do not step between tractor and implement when operating the external controls for the three-
point hitch.

There is a danger of crushing and shearing injury when operating the support devices.

When mounting implements at the front or rear of a tractor, do not exceed

the permissible total tractor weight

the permissible tractor axle loads

The permissible load-bearing capacities of the tractor tyres.

Observe the max. payload of the mounted implement and the permissible axle loads of the
tractor.

Always ensure that the tractor lower links are adequately locked against sideways movement
before transporting the implement.

When travelling on public roads,

the control lever for the tractor lower links must be secured against lowering

the control terminal must be switched off.

Move all equipment into the transport position before travelling on the road.

Any mounted implements and ballast weights affect the handling, steering and braking of the
tractor.

The tractor front axle must always be loaded with at least 20 % of the empty tractor weight to
ensure sufficient steering power. Apply front weights if necessary.

Repair, maintenance and cleaning work or rectifying malfunctions must always only be carried
out with

the ignition key removed,

and the control terminal switched off.

Leave safety devices attached and always put them in the protective position.