AMAZONEN-Werke Amazone Centaya 3000 Super 1600, Руководство по эксплуатации

Страница: 168 / 222

Transportation
168
Centaya Super BAH0092-6 10.20
9 Transportation
DANGER
In Germany and several other
countries, the transportation of
implements mounted on the tractor
on public roads and routes is
approved up to a width of 3.0 m.
Fig. 220
Transport of a combination over 3.0 m wide is
only permitted on a transport vehicle in these
countries. Place and secure the combination
consisting of soil tillage implement, roller and
pack top seed drill on the transport vehicle in
accordance with regulations. Do not exceed the
max. transport height of 4.0 m.
Read the transport width of the seed drill and soil
tillage implement combination from both
operating manuals. The data can be found in the
"Technical data" section.
9.1 Moving the seeding combination into transport position
1. Switch off the fan.
2. When the implement has the coulter lift and the coulters are lifted, move the
coulters and harrow into working position.
3. Raising the track markers makes the tramline counter advance. Advancing of the
tramline counter can be disabled, refer to

"AmaDrill 2" operating manual

"ISOBUS software" operating manual.
4. Fold and lock the track markers ........................................................................................ Page 160
5. Move the tramline markers to the transport position ......................................................... Page 163
6. Move the exact following harrow into transport position ................................................... Page 157
7. Move the exact following harrow road safety bar to the transport position ....................... Page 167
8. Check the permissible values for the total tractor weight, axle loads and tyre load-
bearing capacity with the seed hopper full ........................................................................ Page 103
9. Empty the seed hopper if necessary ................................................................................. Page 181
10. Close the roller tarpaulin of the seed hopper.
11. Close the flap of the control centre ................................................................................... Page 139
12. Fold up the steps ............................................................................................................... Page 129
13. Switch off the work floodlights ........................................................................................... Page 174
14. Switch off the control terminal; refer to the "Control terminal" operating manual.
15. Check the lighting system and warning signs for proper function and cleanliness ............ Page 44
16. Remove the parking supports.
The parking supports do not have a locking device. When transporting the
combination, they can wander out of the mounts uncontrollably and pose a risk for
other road users.
17. Disable the tractor control units required for operating the implement, see also