Alstom MiCOM P846, Техническое руководство

Страница: 28 / 298

P846/EN TD/D Technical Data
(TD) 2-2
MiCOM P846
TD
Pick-up: approx. 75% of battery nominal set,
lter removed,
ity filter on.
Output Contacts
Standard Contacts
y outputs for signaling,
gs (Not Switched):
or 3s
ms
ated voltage:
ake & Break Capacity:
(L/R = 50ms)
)
ake, Carry:
, dc resistive, 10,000
its of
ake, Carry & Break:
sistive, 10,000
s of
0.5A for 1 sec, dc inductive, 10,000
s of
10A for 1.5 secs, ac resistive / inductive,
urability:
ontact: 10 000 operations
loaded contact rations
(Total ci se):
et Time (Total c
High Bre
):
or 3s
ms
ated voltage:
ake & Break Capacity:
/R = 50ms)
Power Supply
Auxiliary Voltage (Vx)
Three ordering options:
(i) Vx: 24 to 48 Vdc
(ii) Vx: 48 to 110 Vdc, and 30 to
100Vac
(rms)
(iii) Vx: 110 to 250 Vdc, and 100 to
240Vac
(rms)
Operating Range
(i) 19 to 65V (dc only for this variant)
(ii) 37 to 150V (dc), 24 to 110V (ac)
(iii) 87 to 300V (dc), 80 to 265V (ac)
With a tolerable ac ripple of up to 12% for a dc
supply, per IEC 60255-11: 1979.
Nominal Burden
Quiescent burden: 11W. (Extra 1.25W when
fitted with second rear Courier)
Additions for energized binary inputs/outputs:
Per opto input:
0.09W (24 to 54V),
0.12W (110/125V),
0.19W (220/120V).
Per energized output relay: 0.13W
Power-up Time
Time to power up < 11s.
Power Supply Interruption
Per IEC 60255-11: 1979
The relay will withstand a 20ms interruption
in the DC auxiliary supply, without
de-energizing.
Per IEC 61000-4-11: 1994
The relay will withstand a 20ms interruption
in an AC auxiliary supply, without
de-energizing.
Battery Backup
Front panel mounted
Type ½ AA, 3.6V (SAFT advanced battery
reference LS14250)
Battery life (assuming relay energized for 90%
time) >10 years
Field Voltage Output
Regulated 48Vdc
Current limited at 112mA maximum output
Digital (“Opto”) Inputs
Universal opto inputs with programmable
voltage thresholds. May be energized from the
48V field voltage, or the external battery
supply.
Rated nominal voltage: 24 to 250Vdc
Operating range:
19 to 265Vdc
Withstand: 300Vdc.
Nominal pick-up and reset thresholds:
Reset: approx. 64% of battery nominal set.
Recognition time:
<2ms with long fi
<12ms with half-cycle ac immun
General purpose rela
tripping and alarming:
Continuous Carry Ratin
Maximum continuous current: 10A
Short duration withstand carry: 30A f
250A for 30
R 300 V
M
DC: 50W
resistive
DC: 62.5W inductive
AC: 2500VA resistive (cos
φ
= unity
AC: 2500VA inductive (cos
φ
= 0.7)
M
30A for 3 secs
operations (subject to the above lim
make / break capacity and rated voltage)
M
4A for 1.5 secs, dc re
operations (subject to the above limit
make / break capacity & rated voltage)
operations (subject to the above limit
make / break capacity & rated voltage)
10,000 operations (subject to the above
limits of make / break capacity & rated
voltage)
D
Loaded c
minimum,
Un : 100 000 ope
minimum.
Operate Time rcuit respon
Less than 5ms
Res ircuit response):
Less than 5ms
High Speed / ak Contacts
Continuous Carry Ratings (Not Switched
Maximum continuous current: 10A
Short duration withstand carry: 30A f
250A for 30
R 300 V
M
DC: 7500W
resistive
DC: 2500W inductive (L