Alstom MiCOM P846, Техническое руководство

Страница: 100 / 298

P846/EN OP/D Operation
(OP) 5-22
MiCOM P846
OP
2.7.1
to cancel or restart
nu. When the command has been executed, the present status of the
fault relay screen. Figure 15
rol functionality.
To avoid accidental operation of the trip and close functionality, the hotkey CB control
commands are disabled for 10 seconds after exiting the hotkey menu.
CB control using hotkeys
The hotkeys allow direct access to the manual trip and close commands, bypassing the
SYSTEM DATA menu. Select TRIP or CLOSE, then confirm. If a trip is executed a screen
with the CB status appears once the command has been completed. If a close is executed a
timing bar appears while the command is being executed, with the option
the close procedure. The timer used is taken from the manual close delay timer setting in
the CB Control me
circuit breaker is displayed. Select the next appropriate command or exit, which returns to
the default relay screen.
If no keys are pressed for 25 seconds while waiting for the command confirmation, the relay
reverts to showing the CB Status. If no key presses are made for 25 seconds while
displaying the CB status screen, the relay reverts to the de
shows the hotkey menu associated with CB cont
CLOS E D
TRI P
MiCOM
P 846
HOTK E Y CB CTRL
<CB STATUS> E X E CUT E
CO N FIRM
CLOS E
<CB STATUS>
Def a ult Displ a y
E XIT
CO N FIRM CA N C E L
E XIT
E X E CUT E
CB TRI P O PEN CB CLOS E
CO N FIRM CA N C E L
E X E CUT E CLOS E
R E START CA N C E L
30 S E CS
CB Closed CB Open
Hotkey Menu
P22 46 EN c
Figure 15: CB control hotkey menu
2.8 Control inputs
The control inputs function as software switches that can be set or reset either locally or
remotely. These inputs can be used to trigger any function that they are connected to as
part of the PSL. There are three setting columns associated with the control inputs that are:
“CONTROL INPUTS”, “CTRL. I/P CONFIG.” and “CTRL. I/P LABELS”. The function of these
columns is described below:
Menu Text Default Setting Setting Range Step Size
CONTROL INPUTS
Ctrl I/P Status 00000000000000000000000000000000
Control Input 1 No Operation No Operation, Set, Reset
Control Input 2 to 32 No Operation No Operation, Set, Reset