Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 77 / 458

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017 77
Configure Switch Features Chapter 3
4.
Click Save.
5.
Repeat Steps 3 and 4 to create as many conditions as needed.
6.
To order the conditions in the list, use the Move buttons
.
7.
Click Submit.
Apply an ACL to a Port
You can apply inbound and outbound ACLs to ports:
•
Inbound ACLs can be applied to any port.
•
Outbound ACLs can be applied to only routed ports or ports assigned
to an Access VLAN. You can configure these port settings in the
Administrative Mode field on the Edit Physical Port page. For more
information about configuring port settings, see
page 57 .
Destination Type (Extended ACL only). Choose the type of the destination to which the packet is sent:
• Host
• Any
• Network
Dest Address (Extended ACL only). Type the network or host number to which the packet is sent.
Dest Wildcard (Extended ACL only). Type an ACL mask for the destination.
Dest Operator (Extended ACL only). To compare the destination, choose an operator from the pull-down menu.
Dest Port (Extended ACL only). Type the destination port number to compare.
Valid values: 0…65535
IMPORTANT The order of the conditions is critical to whether a packet is
forwarded. The first condition in the list that matches a packet
allows the packet to be forwarded. After the first match, the switch
stops testing.