manualshive.com logo in svg

Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 63 / 458

Поделиться
Скачать
Allen-Bradley armorstratix 5700 Скачать руководство пользователя страница 63

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

63

Get Started

   Chapter 2

Secure Digital (SD) Card

The following switches can store their configuration in an SD card or internal 
memory:

•

Stratix 5700 and ArmorStratix 5700 switches have a slot for an optional 
SD card. You must use the 1784-SD1 card available from Rockwell 
Automation with the switches. 

•

Stratix 5400 and Stratix 5410 switches ship with an SD card, which 
stores the initial configuration and firmware for the switches.

You can use the SD card instead of internal memory to do the following:

•

Restore a switch configuration in case of failure.

•

Duplicate configurations when you are deploying a new network.

•

Synchronize the initial configuration and firmware of a Stratix 5400 
switch to internal memory.

In general, the start method for the switch becomes the source for any changes 
you make to the configuration. For example, if you start from the SD card, any 
changes you make are saved to the SD card. If you start the switch from internal 
memory, even if you insert an SD card while starting the system, changes are 
saved to internal memory. 

You can use Device Manager or the Logix Designer application to synchronize 
the SD card for configuration and IOS updates. The configuration 
synchronization process synchronizes config.text and vlan.dat from the source 
to the destination. If other files, such as back-up configurations, are present on 
the SD card, they are not synchronized.

ATTENTION: 

If a non-Rockwell Automation SD card is used in Stratix 

switches, Rockwell Automation reserves the right to withhold support.

ATTENTION: 

When synchronizing, be aware of your startup source, so that 

you know which way to synchronize. Device Manager provides this 
information on the Manual Sync tab. If you synchronize in the wrong 
direction, you can overwrite your desired configuration.

Содержание armorstratix 5700











































































































































































































































































































































































































































































Отзывы:

Нет отзывов