manualshive.com logo in svg

Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 288 / 458

Поделиться
Скачать
Allen-Bradley armorstratix 5700 Скачать руководство пользователя страница 288

288

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

Chapter 4

   Monitor the Switch

Table 102 - Stratix 5700 and ArmorStratix 5700 Port Status Indicators 

Mode

Status

Description

Status

In Status mode, the port status indicators show the connection and activity status of the port. Status mode is the default mode.

Off

No link is present on the port.

Solid green

Port link; no activity.

Flashing green and off

Link is active and healthy.

Alternating green and 
amber

There is a fault or error on the link.

Solid amber

The port is disabled.

Duplex

In Duplex mode, the port status indicators show the Duplex mode (Full-duplex or Half-duplex) of the ports. The 10/100/1000 ports operate only in Full-duplex 
mode. 

Off

The port is not operating.

Solid amber

The port is operating in Half-duplex mode.

Solid green 

The port is operating in Full-duplex mode.

Speed

In Speed mode, the port status indicators show the operating speed of the ports. 

Off

The port is not operating.

Solid amber

The port is operating at 10 Mbps.

Solid green

The port is operating at 100 Mbps.

Flashing green

The port is operating at 1000 Mbps.

Power

In Power mode, the port status indicators show the status of PoE on switch models with PoE capability.

Off

PoE is disabled on the port.

Solid green

PoE is enabled on the port. The switch port is providing power.

Flashing green and 
amber

PoE is denied because it exceeds the power capacity of the switch.

Flashing amber

PoE is denied because it exceeds the configured power limit for the switch port.

Содержание armorstratix 5700











































































































































































































































































































































































































































































Отзывы:

Нет отзывов