manualshive.com logo in svg

Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 309 / 458

Поделиться
Скачать
Allen-Bradley armorstratix 5700 Скачать руководство пользователя страница 309

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

309

Monitor the Switch

   Chapter 4

Total Translations Attached to Core 0

The total number of translations across all NAT instances for ports 1…6 and 13…18.

Total Instances Attached to Core 0

The total number of NAT instances across ports 1…6 and 13…18.

Total Translations Attached to Core 1

The total number translations across all NAT instances for ports 7…12, 19…24, and 25…28.

Total Instances Attached to Core 1

The total number of NAT instances across ports 7…12, 19…24, and 25…28.

Total NAT Translated Packets

The total number of packets across all NAT instances for all ports.

Total Dropped Packets

The total number of packets that have been dropped across all NAT instances for all ports.

Instance Statistics

Selected Instance

From the pull-down menu, choose the instance for which to view statistics.

Current Active Translations

The number of translations that have occurred within the last 90 seconds for the instance.

Total NAT Translated Packets

The total number of packets that have been translated for the instance.

Total Dropped Packets

The total number of packets that have been dropped for the instance. 

Total Private to Public Address Translations

The total number of translations that are configured for devices on the private subnet. 

Total Public to Private Address Translations

The total number of translations that are configured for devices on the public subnet.

Total Translations

The total number of translations that are configured for the instance.

ARP Fixup

The number of ARP packets that have been fixed up for the instance.

ICMP Fixup

The number of ICMP packets that have been fixed up for the instance.

Total Fixups

The total number of ARP and ICMP packets that have been fixed up for the instance.

 Non-Translated Unicast Traffic

The number of packets with untranslated unicast traffic for the instance.

 Multicast Traffic

The number of packets with multicast traffic for the instance.

 IGMP Traffic

The number of packets with IGMP traffic for the instance.

Table 116 - NAT Statistics (Continued)

Field

Description

Содержание armorstratix 5700











































































































































































































































































































































































































































































Отзывы:

Нет отзывов