manualshive.com logo in svg

Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 76 / 458

Поделиться
Скачать
Allen-Bradley armorstratix 5700 Скачать руководство пользователя страница 76

76

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

Chapter 3

   Configure Switch Features

3.

To define the ACL entry, click Add in the table area, and then complete 
the fields.

Field

Description

ACL Type

Click Standard or Extended:

•

Standard (default)—Uses source addresses.

•

Extended—Uses source and destination addresses and optional protocol type information.

ACL Name

Type an alphanumeric name to identify the ACL.

Named access lists are more convenient than numbered access lists because you can specify a meaningful name that is easier to remember and 
associate with a task. You can reorder statements in or add statements to a named access list.

ACL Number

The number of the ACL, which shows the type of access list:

•

1…99—IP standard access list.

•

100…199—IP extended access list.

•

1300…1999—IP standard access list (expanded range).

•

2000…2699—IP extended access list (expanded range).

Implicit Deny

(Not editable). By default, all ACLs have an implicit deny statement at the end. If a packet does not match any of the criteria that are specified in the 
ACL, it is denied.

Log

Check the checkbox to enable informational logging messages about packets that are permitted or denied by an ACL to be sent to the system log.

To view the system log, from the Monitor menu, choose Syslog.

Field

Description

Permit

To permit traffic, check the checkbox. 
To deny traffic, clear the checkbox.

An access list must contain at least one permit statement or all packets are denied entry into the network.

Protocol

(Extended ACL only). Type the following:

•

The name or number of an IP protocol (AHP, EIGRP, ESP, GRE, ICMP, IGMP, IGRP, IP, IPINIP, NOS, OSPF, PCP, PIM, TCP, or UDP) 

or

•

An integer in the range of 0…255 representing an IP protocol number

To match any Internet Protocol, including ICMP, TCP, and UDP, type IP.

Source Type

Choose the source from which the packet is sent:

•

Host

•

Any

•

Network

Source Address

Type the address of the network or host from which the packet is sent.

Source Wildcard

Type an ACL mask for the source.

Source Operator

(Extended ACL only). To compare the source, choose an operator from the pull-down menu.

Source Port

(Extended ACL only). Type the source port number to compare.

Valid values: 0…65535

Содержание armorstratix 5700











































































































































































































































































































































































































































































Отзывы:

Нет отзывов