Allen-Bradley armorstratix 5700 Скачать руководство пользователя страница 224

Страница: 224 / 458

224

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

Chapter 3

Configure Switch Features

To change the static MAC IDs table for a port, follow these steps.

Click the radio button next to the port to configure.

Click Edit.

Clear or check the Enable checkbox.

Configure MAC IDs as follows:

•

To add the existing MAC IDs of devices that are currently connected
to a port, click Add Learned MAC Addresses.

•

To add a specific MAC ID to the table, type a MAC ID in the format
fields and click Add.

•

To remove a MAC ID from the table, select the MAC ID and click
Remove.

•

To clear the table, click Remove All.

Click OK.

Содержание armorstratix 5700











































































































































































































































































































































































































































































Результаты поиска

Содержание armorstratix 5700

Отзывы:

Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 224 / 458

Результаты поиска

Содержание armorstratix 5700

Отзывы: