Agrio Gigant, Инструкция по эксплуатации

Страница: 47 / 96

After this measurement, correct the detected deviation from the required quantity by changing the
pressure and repeat the measurement until the required quantity is reached.
The time required for this method is much higher.
With correctly set spraying pressure and specified travel speed, the sprayer can apply exactly the
desired quantity.
13 Linkage
13.1 Boom in working position
-
The up and down movement of the boom and the folding and unfolding are hydraulically
controlled functions, for which we need a tractor with two hydraulic circuits already in operation
or with one if a hydraulic control block is installed on the machine. First press the button for boom
control on the terminal.
- Then a button to raise the boom. For subsequent unfolding, the boom must be raised to the
maximum.