Agrio Gigant страница 30 Скачать руководство пользователя

Страница: 30 / 96

When the supply line (red) is connected, the pressure coming from the tractor automatically presses
the control button for the release valve on the trailer brake valve.

Power lines:
-

They must not tighten, pinch or chafe when turning and must be able to move freely.

It must not touch any other parts of the machine.

Protection against rolling away
-

On level ground with hand brake or wedges.

On steeply sloping terrain with handbrake and wedges.

Connect hydraulic hoses and cables for lighting.

Connect the hydraulic couplings to the tractor.

The hydraulic circuits of the tractor must be depressurized so that the hydraulic plugs can be
connected.

6. lift the hydraulic support foot

The hydraulic hoses of the support foot must both be connected before actuation.

Attention!

Always secure the support foot with a bolt and a cotter pin.

With the hydraulic support foot, always engage the red marked safety catch, as shown in
the illustration, to prevent damage to the hydraulic line!

Содержание Gigant

































































































Результаты поиска

Содержание Gigant

Отзывы:

Похожие инструкции для Gigant

Бренды по названию

Популярные бренды

Agrio Gigant, Инструкция по эксплуатации

Результаты поиска

Содержание Gigant

Отзывы:

Похожие инструкции для Gigant

Бренды по названию

Популярные бренды