Agrio Gigant Скачать руководство пользователя

Страница: 6 / 96

General information

This chapter contains important recommendations for the safe use of the machine.

2.1

Warranty and guarantee

Claims for personal injury or property damage cannot be made if one or more of the following
causes are found to exist:

the unauthorized use of the device.

improper installation, commissioning, operation and maintenance of the machine.

Use of the machine with damaged, incorrectly attached or non-functioning safety and protective
devices.

Failure to observe the recommendations in the operating instructions for commissioning,
operation and maintenance of the machine.

individual finishing on the machine.

Insufficient inspection of the worn parts.

improperly performed repair.

Natural disasters, damage caused by third parties and/or gross violence.

2.1.1

Parts not covered by warranty

Wear parts:

Lifting rope

Suspension rope

Pump diaphragms

Pump valves

Trolley rollers

Shock absorber

Antennas

Running and hanging roller

2.2

Principles of machine use

Observe the recommendations in the instructions for use.

Knowledge of the basic safety recommendations and regulations is a prerequisite for safe
handling and trouble-free operation.

2.2.1

Obligation of the user

The user is obliged to ensure that the machine is operated only by a person who:

is familiar with the basic regulations on occupational safety and accident prevention.

is familiar with the work of the machine.

has read and understood the operating instructions.

complies with the regulations on the use of work equipment, as well as the regulations on health
protection

Содержание Gigant

































































































Результаты поиска

Содержание Gigant

Отзывы:

Похожие инструкции для Gigant

Бренды по названию

Популярные бренды

Agrio Gigant, Инструкция по эксплуатации

Результаты поиска

Содержание Gigant

Отзывы:

Похожие инструкции для Gigant

Бренды по названию

Популярные бренды