Remote Interface Configuration
Finally, toggle the first softkey to
Manual
and press
More
and
Gateway
. Then set the appropriate gateway
address using the numeric keypad or knob.
l
SCPI:
SYSTem:COMMunicate:LAN:GATeway "<
Hostname
A hostname is the host portion of the domain name, which is translated into an IP address.
l
The instrument receives a unique hostname at the factory, but you may change it. The hostname must be unique
on the LAN.
l
Name must start with letter; other characters can be an upper or lower case letters, numeric digits, or dashes ("-
").
l
This setting is non-volatile; it will not be changed by power cycling or
l
Front Panel:
Finally, press
Host Name
and enter the hostname with the knob and cursor keys. The knob changes the char-
acter; cursor arrows move between characters.
l
SCPI:
SYSTem:COMMunicate:LAN:HOSTname "<
Domain Name
A domain name is a registered Internet name that gets translated into an IP address. You cannot set it from the front
panel or SCPI.
DNS Server
DNS (Domain Name Service) is an Internet service that translates domain names into IP addresses. The DNS server
address is the IP address of a server that performs this service.
l
Normally, DHCP discovers DNS address information; you only need to change this if DHCP is unused or not func-
tional. Contact your LAN administrator for DNS server details.
l
This setting is non-volatile; it will not be changed by power cycling or
l
Front Panel:
122
Agilent 33500 Series Operating and Service Guide
Содержание Agilent 33500 Series
Страница 1: ...Agilent Technologies 33500 Series Waveform Generator Operating and Service Guide ...
Страница 68: ...Output Configuration OUTPUT SYNC SOURCE CH1 CH2 Agilent 33500 Series Operating and Service Guide 67 ...
Страница 410: ...Block Diagram Block Diagram Agilent 33500 Series Operating and Service Guide 409 ...
Страница 429: ......