manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Справочное руководство

Agilent Technologies 8960 Series 10 - руководство по эксплуатации доступно для бесплатного скачивания с нашего веб-сайта. Это официальное Руководство по эксплуатации содержит подробное описание продукта и инструкции по использованию. Посетите manualshive.com и загрузите его сейчас!

Поделиться
Скачать
background image

196

 S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_prog_guide_step8.fm

Step 8: Disconnect the Mobile Station from the BSE

Step 8: Disconnect the Mobile Station from the BSE

Background

See “Step 4: Establish an Active Link with Mobile Station” for a discussion of call connect/disconnect 
synchronization.

Using the Call Connected State Query for Call Disconnect Synchronization

The call-connected-state query only hangs if the call is in a transitory state, otherwise it immediately returns 
a 1 (Connected state) or a 0 (Idle state). At the start of a call disconnect process the call state is Connected. 
Sending a call-connected-state query at the start of a call disconnect process could immediately return a one if 
the query is satisfied before the disconnection process has started (that is, moved from the Connected state 
into one of the transitory states). For correct call disconnect synchronization it is necessary that the query be 
temporarily held off until after the call disconnect process has started. The call-state-change-detector is 
provided which can be used to temporarily hold off the query from returning an answer until the appropriate 
state change has occurred.

Using the Call Connected Arm Command for Call Disconnect Synchronization

The call-state-change-detector arm command is used by the control program to tell the test set that it is 
expecting a change to the state of a call prior to initiating the state change. By first arming the 
call-state-change-detector, then querying the call connected state, and then attempting a BS or MS call 
termination, the call-connected-state query will hang until the disconnection operation begins and then 
reaches a final (Idle or Connected) state.

However, if the change detector is armed and a call disconnection is attempted but the call state never 
progresses from the Connected state, the call-connected-state query would hang forever. This could easily 
happen if the mobile is badly broken, no one pushes the “end” button on the mobile, etc.

The call-state-change-detector time-out timer is provided which is used to prevent the call-connected-state 
query from hanging forever.

Using the Call State Change Detector Time-out for Call Disconnect Synchronization

The call-state-change-detector time-out mechanism allows the test set to disarm the call-state-change-detector 
which releases the call connected state query if it is currently hanging.

The time-out timer is started whenever the call-state-change-detector is armed or gets rearmed when already 
armed. The duration of the time-out is set using the call-connected-time-out command and should be set to the 
maximum amount of time the control program should wait between arming and the disconnect process to 
begin. Once the process starts and the call state has moved into one of the transitory states the GSM defined 
protocol timers take over and prevent the call state from staying in a transitory state forever.

If the timer expires while the call is in the Idle or Connected state, the call-state-change-detector is disarmed, 
which releases the call connected state query if it is currently hanging.

If the timer expires while the call is in one of the transitory states it is ignored as, once in any transitory state, 
the GSM-defined protocol timers limit the amount of time that can be spent in any transitory state.

Содержание 8960 Series 10







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 8960 Series 10

GBC AIO Quick Start Manual preview
AIO
Бренд: GBC Страницы: 8
KAPSCH T600 Operator And Maintenance Manual preview
T600
Бренд: KAPSCH Страницы: 57
Taurus B450 Assembly Instructions Manual preview
B450
Бренд: Taurus Страницы: 28
Kärcher HDS Series Operator'S Manual preview
HDS Series
Бренд: Kärcher Страницы: 54
ABB 2 Series Operation And Installation Manual preview
2 Series
Бренд: ABB Страницы: 85
GE Vivid q N Service Manual preview
Vivid q N
Бренд: GE Страницы: 698
made for movement Xplore User Manual preview
Xplore
Бренд: made for movement Страницы: 51
Dana Design ArcLight Quick Start Instructions preview
ArcLight
Бренд: Dana Design Страницы: 20
R.M. Young 32500 Quick Start Manual preview
32500
Бренд: R.M. Young Страницы: 10
Eaton PowerXL DX-NET-ETHERNET2-2 User Manual preview
PowerXL DX-NET-ETHERNET2-2
Бренд: Eaton Страницы: 48
Eaton Power Xpert C445 Manual preview
Power Xpert C445
Бренд: Eaton Страницы: 2
Hammer Strength MTSP Unpacking And Assembly Instructions preview
MTSP
Бренд: Hammer Strength Страницы: 18
TATU PT Operator'S Manual preview
PT
Бренд: TATU Страницы: 30
Rane HC6S Operator'S Manual preview
HC6S
Бренд: Rane Страницы: 4
Sabio 2010D Operation Manual preview
2010D
Бренд: Sabio Страницы: 182
Qtx SURGE User Manual preview
SURGE
Бренд: Qtx Страницы: 6
Strapack iQ400 Original Instruction preview
iQ400
Бренд: Strapack Страницы: 16
Hameg HM1004 Service Manual preview
HM1004
Бренд: Hameg Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды