manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 250 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 250

18-8

Measure Commands

AMPLitude:PI?

Returns the one level measurement.  Always uses the vertical units of the channel. Use 

“AMPLitude:ZLEVel?” on page 18-11

 to return the zero level measurement.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:OLEVEL?”

Returned Format

[:MEASure:AMPLitude:OLEVel] <value><NL>

AMPLitude:PI?

Query

MEASure:AMPLitude:PI? {ONE | ZERO}

Returns the dual-dirac periodic interference measurement for the specified logic level.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:PI? ONE ”

Returned Format

[:MEASure:AMPLitude:PI] <value><NL>

AMPLitude:PIRMs?

Query

MEASure:AMPLitude:PIRMs? {ONE | ZERO}

Returns the RMS periodic interference measurement for the specified logic level. Uses the 
current noise and interference units.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:PIRMS? ONE ”

Returned Format

[:MEASure:AMPLitude:PIRMs] <value><NL>

AMPLitude:Q?

Query

MEASure:AMPLitude:Q?

Returns the Q measurement.

Restrictions

86100C (software revision A.07.00 and above) with Jitter Mode including Advanced Ampli-
tude Analysis/RIN/Q-Factor application.

Example

10 OUTPUT 707;”:MEASURE:AMPLITUDE:Q?”

Returned Format

[:MEASure:AMPLitude:Q] <value><NL>

AMPLitude:RINoise?

Query

MEASure:AMPLitude:RINoise? [{OMAMplitude | OLEVel}]

Returns the RIN (Relative Intensity Noise) measurement value which is only available for 
optical signals. It can be based on the one level (

OLEVel

) or based on the RIN OMA measure-

ment (

OMAMplitude

). If no argument is given, the measurement value returned is for the cur-

rently selected type of RIN measurement as specified by the 

“AMPLitude:RINoise:DEF” on 

page 18-9

. 

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов