Agilent Technologies 86100A Скачать руководство пользователя страница 145 | Manualshive

Страница: 145 / 366

Agilent Technologies 86100A Скачать руководство пользователя страница 145

7-5

Calibration Commands

ERATio:STATus?

ERATio:STATus?

Query

:CALibrate:ERATio:STATus? CHANnel<N>

This query returns

CALIBRATED

or

DEFAULTED

indicating whether the ratio being used

is the result of an extinction ratio calibration or is the factory default value. Once an extinc-

tion ratio calibration is performed, the query always returns

DEFAULTED

until the instru-

ment power is cycled or the module is removed and then re-inserted into the instrument.
<N> is an integer, from 1 to 4.

Returned Format

[:CALibrate:ERATio:STATus] {CALIBRATED | DEFAULTED}<NL>

FRAMe:LABel

Command

:CALibrate:FRAMe:LABel <label>

This command is intended for user notes, such as name/initials of the calibrator or special
notes about the calibration. It accepts a string of up to 80 characters. The information is
optional. <label> is a string, enclosed with quotes, with a maximum of 80. characters.

Query

:CALibrate:FRAMe:LABel?

The query returns the currently defined label for the frame.

Returned Format

[:CALibrate:FRAMe:LABel] <quoted string><NL>

FRAMe:STARt

Command

:CALibrate:FRAMe:STARt

Starts the annual calibration on the instrument mainframe. Whenever a calibration message
is displayed on the instrument, send the :CALibrate:CONTinue, :CALibrate:CANCel, or :CAL-
ibrate:SDONE commands. Sending any other command, including *OPC, disrupts the instru-
ment forcing you to cycle instrument power.

FRAMe:TIME?

Query

:CALibrate:FRAMe:TIME?

This query returns the date, time and temperature at which the last full frame calibration
process was completed.

Returned Format

[:CALibrate:FRAMe:TIME] <time> <NL>

<time>

Is in the format: DD MMM YY HH:MM <delta_temp>

<delta_temp>

Is the difference between the current temperature and the temperature when the last cali-
bration was done. For example, <delta_temp> might be:

–5C
10C
–12C

MODule:LRESistance

Command

:CALibrate:MODule:LRESistance <resistance_value>

«
...
143
144
145
146
147
...
»

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов