manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 285 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 285

18-43

Measure Commands

TEDGe?

TEDGe?

Query

:MEASure:TEDGe? <meas_thres_txt>,<slope><occurrence> [,<source>]

Returns the time interval between the trigger event and the specified edge (threshold level, 
slope, and transition) in oscilloscope mode. The query will return the time interval between 
the reference plane and the specified edge in TDR mode.

<meas_thres_txt> is defined as UPPer, MIDDle, or LOWer to identify the threshold. <slope> 
is { – (minus) for falling | + (plus) for rising | <none> (the slope is optional; if no slope is spec-
ified, + (plus) is assumed) }. <occurrence> is a numeric value representing the edge of the 
occurrence. The desired edge must be present on the display. Edges are counted with 1 being 
the first edge from the left on the display. <source> is {CHANnel<N> | FUNCtion<N> | 
RESPonse<N> | WMEMory<N>} with <N>, for channels, functions, TDR responses, and 
waveform memories, equal to 1, 2, 3, or 4.

N O T E

TEDGe is measured for a value less than or equal to 20. A value greater than 20 returns data out of range.

Mode

Oscilloscope and TDR modes.

Returned Format

[:MEASure:TEDGe] <time>[,<result_state>]<NL>

<time> is the time interval between the trigger event and the specified edge (oscilloscope 
mode) or the time interval between the reference plane and the specified edge in TDR mode. 
If SENDvalid is ON, the <result_state> is returned with the measurement result. Refer to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

This example returns the time interval between the trigger event and the 90% threshold on 
the second rising edge of the source waveform to the numeric variable, Time.

10 OUTPUT 707;":SYSTEM:HEADER OFF"

!Response headers off

20 OUTPUT 707;":MEASURE:TEDGE? UPPER,+2"
30 ENTER 707;Time

N O T E

When receiving numeric data into numeric variables, turn off the headers. Otherwise, the headers may cause 
misinterpretation of returned data.

TDR:AVERage

Command

:MEASure:TDR:AVERage {CHANnel<N> | RESPonse<N>}

Measures the average TDR impedance for the selected channel or response. 

Restrictions

TDR mode. Software revision A.05.00 and above (86100C instruments). 

Query

:MEASure:TDR:AVERage? {CHANnel<N> | RESPonse<N>}

The query returns the calculated average voltage of the specified source.

Returned Format

[:MEASure:TDR:AVERage] <value> [,<result_state>]<NL>

The <value> argument is the calculated average TDR impedance. If SENDVALID is ON, the 
<result_state> is returned with the measurement result. Refer to 

Table 18-4 on page 18-39

 

for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASURE:TDR:AVERAGE? RESP1” 

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов