Agilent Technologies 86100A Скачать руководство пользователя страница 147 | Manualshive

Страница: 147 / 366

Agilent Technologies 86100A Скачать руководство пользователя страница 147

7-7

Calibration Commands

MODule:OWAVelength

130

OUTPUT 707;":CALIBRATE:CONTINUE"

140

OUTPUT 707;":CALIBRATE:SDONE?"

150

ENTER 707;Prompt$ <Done>

160

END

MODule:OWAVelength

Command

:CALibrate:MODule:OWAVelength <wavelength>

This command sets the optical wavelength for an optical channel calibration. This command
should only be used for modules with an optical channel.

Example

10 OUTPUT 707;":CALIBRATE:MODULE:OWAVELENGTH 1340E–9"

MODule:STATus?

Query

:CALibrate:MODule:STATus?{LMODule | RMODule}

This query returns the status of the module calibration (electrical and optical channels) and
optical calibration (optical channels) as either CALIBRATED or UNCALIBRATED. It will
return UNKNOWN if the module does not have calibration capability. Queries to modules
with two electrical channels (including TDR modules) will return the status of module cali-
bration only. Queries to modules with two optical channels will return the status of the mod-
ule calibration, followed by the status of optical calibration of the first channel, followed by
the status of the optical calibration of the second channel.

Returned Format

[:CALibrate:MODule:STATus] {<status vertical calibration>,<status optical calibration> | CALIBRATED |
UNCALIBRATED | UNKNOWN} <NL>

MODule:TIME?

Query

:CALibrate:MODule:TIME? {LMODule | RMODule | CHANnel <N>}

The query returns the date and time at the last channel module calibration, and the differ-
ence between the current channel temperature and the temperature of the channel when it
was last calibrated. If there is not a module in the selected slot, the message “Empty Slot” is
returned. <N> is an integer, from 1 to 4.

N O T E

This query is for a module calibration only.

Returned Format

[:CALibrate:MODule:TIME] <value><NL>

<value>

Is in the format: DD MMM YY HH:MM <delta_temp>

<delta_temp>

Is the difference between the current temperature and the temperature when the last cali-
bration was done. For example, <delta_temp> might be:

–5C
10C
–12C

MODule:VERTical

Command

:CALibrate:MODule:VERTical {LMODule | RMODule | CHANnel<N> | SLOT<N> }

«
...
145
146
147
148
149
...
»

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов