manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 282 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 282

18-40

Measure Commands

RISetime

RISetime

Command

:MEASure:RISetime [<source>]

Measures the rise time of the first displayed edge by measuring the time at the lower thresh-
old of the rising edge, measuring the time at the upper threshold of the rising edge, then cal-
culating the rise time with the following algorithm:

   Rise time = time at upper threshold point

 

–

 

time at lower threshold point.

Sources are specified with the MEASure:SOURce command or with the optional parameter 
following the RISetime command.

Mode

All instrument modes.

<source>

{CHANnel<N> | FUNCtion<N> | RESPonse<N> | WMEMory<N> | CGRade}

Where CHANnel<N>, FUNCtion<N>, RESPonse<N>, and WMEMory<N> apply in Oscillo-
scope and TDR modes only, and CGRade in Eye mode only.

<N>

For channels, functions, TDR responses and waveform memories: 1, 2, 3, or 4.   

With standard measurements selected, the lower threshold is at the 10% point and the upper 
threshold is at the 90% point on the rising edge.

Query

:MEASure:RISetime? [<source>]

The query returns the rise time of the specified source.

Returned Format

[:MEASure:RISetime] <value>[,<result_state>]<NL>

<value> is the rise time in seconds. If SENDvalid is ON, the <result_state> is returned with 
the measurement result. Refer to 

Table 18-4 on page 18-39

 for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;":MEASURE:RISETIME?"

SCRatch

Command

:MEASure:SCRatch 

Clears the measurement results from the screen. 

Example

This example clears the current measurement results from the screen.

10 OUTPUT 707;":MEASURE:SCRATCH"

SENDvalid

Command

:MEASure:SENDvalid {ON | OFF | 1 | 0}

E

nables the result state code to be returned with the :MEASure:RESults? query and with indi-

vidual measurements. If SENDvalid is off, any questionable restults are returned as 
9.999E+37. If SENDvalid is on, current values are returned for any questionable results.

Query

:MEASure:SENDvalid?

The query returns the state of the Sendvalid control.

Returned Format

[:MEASure:SENDvalid] {0 | 1}<NL>

Examples

10 OUTPUT 707;":MEASURE:SENDVALID ON"

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов