manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 233 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 233

17-5

Mask Test Commands

COUNt:SAMPles?

negative margins. To determine a negative margin, increase the magnitude of the negative 
margin until the number of margin hits goes to zero. All data acquired since mask margin 
testing was enabled will be compared to the margin. Sampled points acquired before the mar-
gin was activated, that fall into the margin region, will also show up as mask hits. MASK 
Returns the number of data points that failed the standard mask. 

Returned Format

[:MTESt:COUNt:HITS] <number_of_hits><NL>

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MTEST:COUNT:HITS? MARGin”

COUNt:SAMPles?

Query

:MTESt:COUNt:SAMPles?

The query returns the total number of samples captured in the current mask test run. The 
value 9.999E37 is returned if mask testing is not enabled.

Returned Format

[:MTESt:COUNt:SAMPles] <number_of_samples><NL>

<number_of _samples> is the total number of samples for the current test run.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MTEST:COUNT:SAMPLES?”

COUNt:WAVeforms?

Query

:MTESt:COUNt:WAVeforms?

The query returns the total number of waveforms gathered in the current mask test run. The 
value 9.999E37 is returned if mask testing is not enabled.

Returned Format

[:MTESt:COUNt:WAVeforms] <number_of_waveforms><NL>

<number_of_ waveforms> is the total number of waveforms for the current test run.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MTEST:COUNT:WAVEFORMS?”

DELete

Command

:MTESt:DELete

This command clears the currently loaded mask. MTESt:DELete is the preferred command. 
(See also MTESt:MASK:DELete.)

Example

10 OUTPUT 707;”:MTEST:DELETE”

EXIT

Command

:MTESt:EXIT

This command terminates mask testing.

N O T E

Compatibility with the Agilent 83480A/54750A. 

The :MTESt:TEST OFF command performs the 

same function as :MTESt:EXIT and is provided for compatibility with the Agilent 83480A/54750A. For new 
programs, use the :MTESt:EXIT command.

Example 

10 OUTPUT 707;”:MTEST:EXIT”

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов