manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 326 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 326

22-10

TDR/TDT Commands (Rev. A.06.00 and Above)

STIMulus:MODE

Example

10 OUTPUT 707;":TDR:STIM:EXT:POL POS, NEG"

Query

The query always returns both polarity values regardless of stimulus mode.

:TDR:STIMulus:EXTernal:POLarity?

Returned Format 

[:TDR:STIMulus:EXTernal:POLarity] {POSitive | NEGative}, {POSitive | NEGative}<NL> 

STIMulus:MODE

Command

:TDR:STIMulus:MODE {SINGle | DIFFerential | COMMon}

Sets the measurement stimulus to single-ended, differential, or common mode.

Restrictions

Software revision A.06.00 and above. TDR mode.

Example

10 OUTPUT 707;":TDR:STIM:MOD SING"

Query

If :

SYSTem:LONGform

 is ON, this query returns the following strings: 

SINGLEENDED

, 

COMMONMODE

, or 

DIFFERENTIAL

. Note that, with the exception of 

DIFFERENTIAL

, these strings do 

not match the long form argument strings for the command.

:TDR:STIMulus:MODE?

Returned Format 

[:TDR:STIMulus:MODE] {SINGleended | DIFFerential | COMMonmode}<NL> 

STIMulus:RATE

Command

:TDR:STIMulus:RATE { AUTO | <rate>}

This command sets the period of the TDR pulse generator. You should usually leave this set to 
AUTO unless you need to define a specific rate. In AUTO, the instrument will attempt to keep 
subsequent periods off screen when the timebase is changed. <rate> is the period to which 
you want to set the generator, in Hertz. You can add a suffix to indicate that the rate is in 
Hertz (HZ, KHZ, and so on).

The query returns the current period of the pulse generator, even when the control is set to 
AUTO. The query is allowed in all modes.

Restrictions

Software revision A.06.00 and above. TDR mode.

Query

:TDR:STIMulus:RATE?

Returned Format 

[:TDR:STIMulus:RATE] <rate><NL>

STIMulus:STATe

Command

:TDR:STIMulus:STATe {CHANnel<N> | LMODule | RMODule}, {ON | 1 | OFF | 0 }

Turns on and off the selected stimulus. Use the CHANnel argument for single-ended stimulus 
and the LMODule (left module) and RMODule (right modules) arguments for differential 
mode or common mode measurements.

Restrictions

Software revision A.06.00 and above. TDR mode.

Example

10 OUTPUT 707;":TDR:STIM:STAT CHAN2, ON"

Query

:TDR:STIMulus:STATe? {CHANnel<N> | LMODule | RMODule}

Returned Format 

[:TDR:STIMulus:STATe] {CHANnel<N> | LMODule | RMODule}, {ON | 1 | OFF | 0 }<NL> 

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов